CONFIGURATION
60
4.17. NTP Client Configuration
NTP client Configuration can be called up by option NTP item in the menu. In the
window can be defined the address prime (Primary NTP server Address) and secondary
NTP server (Secondary NTP server Address), by the help of which the router, after first
interface to the GPRS from make power supply, will adjust the inner clock. Example of NTP
server address can be seenon ntp.isc.org/bin/view/Servers/StratumOneTimeServers. By
parameter Timezone it is possible to set the time zone of the router. By parameter Daylight
Saving Time is possible to define time shift.
By parameter Enable local NTP service it is possible to set the router in mode, that it
can serve as NTP server for other devices.
The changes in settings will apply after pressing the Apply button.
Example of the NTP configuration with set primary and secondary NTP server and with
daylight saving time:
4.18. SNMP Configuration
To enter the SNMP Configuration it is possible with SNMP agent ver.1 configuration
which sends information about the router, eventually about the status of the expansion port
CNT or M-BUSD.
The Community item defines the password for access to the SNMP agent. Item
Contact identifies a person who manages the router together with information how to contact
this person, item Name is the designation of the router and item Location describes the
physical placing of the router.
By choosing Enable XC-CNT extension it is possible to monitor the expansion port
CNT inputs status or by choosing Enable M-BUS extension and enter the Baudrate, Parity
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de
