![LUCHT LHZ Technotherm TTN 200 F Скачать руководство пользователя страница 10](http://html1.mh-extra.com/html/lucht-lhz/technotherm-ttn-200-f/technotherm-ttn-200-f_assembly-and-operating-instructions-manual_1946551010.webp)
Feel good with heat from electricity - www.technotherm.de
Installa� on and opera� ng instruc� ons for storage hea� ng
Feel good with heat from electricity - www.technotherm.de
GB
10|
Assembly
The heater must be prevented from � pping over
by fi xing the two brackets to the wall using the
screws and plugs, all of which are contained in the
plas� c bag in the right-hand side of the heater ca-
binet. If these screws and plugs are unfi t for the
wall fabric in ques� on, other suitable materials
must be used.
The connec� ng cables can now be drawn through
the strain relief at the back of the heater and cut
to length.
Fix the safety brackets to the wall at the height
shown in the diagram. Remember, when placing
the heater on thick-pile carpe� ng that the heater
will sink somewhat into the pile. This must be al-
lowed for as well as if the heater is placed on a
board or feet to raise it from the carpet. The dis-
tance between the brackets should be about one-
half of the heater length, although the exact spa-
cing is not important.
For more stability the brackets can be screwed to
the heater through the spacer bracket at the rear
of the heater.
Remove the metric screw at the right-hand end of
the air-outlet grille....