Lucent Technologies PortMaster OR-HS, Руководство по установке оборудования

Страница: 40 / 70

Observing the Console Display (OR-M)
A-4 PortMaster Office Router Hardware Installation Guide
Observing the Console Display (OR-M)
Follow these instructions if port S1 does not appear on the console display during
configuration of the Office Router:
1. Turn the power switch off.
2. Reinsert the PCMCIA modem card.
Consult the manufacturer’s documentation to ensure that the modem card is
inserted with the correct side up. (See “Connect a PCMCIA Modem (OR-M)” on
page 2-9.)
3. Turn on power (see “Turn On Power” on page 2-12).
An undefined difficulty
occurred at startup, but the
cause cannot be determined
from LED behavior. See the solution column. Try starting in console mode,
and observe the boot
messages. See “Observing Boot
Messages” on page A-5. If the
boot messages do not suggest a
solution, record the
information and contact
Lucent Remote Access
Technical Support.
Table A-1 Hardware Problems and Solutions (Continued)
LED Indication Likely Cause Solution