Lucent Technologies PortMaster OR-HS, Руководство по установке оборудования

Страница: 32 / 70

Turn On Power
2-14 PortMaster Office Router Hardware Installation Guide
If a SPID is set on the port and a circuit to the telephone company exists, the NT1
LED blinks once per second while synchronizing with the telephone company and
then stays solidly lit. If the NT1 LED does not behave this way, contact Lucent
Remote Access Technical Support.
7. Verify that the S1 LED is active (OR-U and OR-ST—OR-ST shown).
The S1 LED stays solidly lit when ISDN port S1 has established a connection. If the
S1 LED does not behave this way, contact Lucent Remote Access Technical
Support.
8. Verify that the S2 LED is active (OR-U and OR-ST—OR-ST shown).
The S2 LED stays solidly lit when ISDN port S2 has established a connection. If the
S2 LED does not behave this way, contact Lucent Remote Access Technical
Support.
System Link Network NT1 S1 S2 PortMaster ISDN Office Router
1186-0014
NT1 LED
System Link Network NT1 S1 S2 PortMaster ISDN Office Router
1186-0014
S1 LED
System Link Network NT1 S1 S2 PortMaster ISDN Office Router
1189-0014
S2 LED