Lucent Technologies PacketStar 20N32, Руководство пользователя, Страница: 74 / 100

Chapter 6 Configuring Interfaces Using the AQueView EMS
Bringing an Interface Into Service
6-10 255-700-467
PacketStar
®
PSAX 4-Port Voice 2-Wire Office Module User Guide , Issue 1 Release 9.0.0
Bringing an Interface Into Service
To bring an interface into service, click Bring Into Service on the appropri-
ate Interface Configuration window, then continue to step 2 of the section,
“Performing Bulk Operations,” in this chapter.
Performing Bulk Operations
Perform the steps in the following procedure to enable or disable trap mes-
sages.
Begin
1
Do one of the following:
A confirmation window appears (see the following table).
2 Do one of the actions described in the following table.
Table 6-3. Performing an Action on an Interface
If you want to... then do this...
create a new interface and apply
it to a channel From the Channel Configuration page, select a channel, select any
value in the Interface Type field, and click Apply to Selected.
bring an interface into service From the Channel Configuration page, right-click the channel(s)
and a menu appears. Select Bring Selected Into Service.
or
From the Front Panel or the Device Tree, right-click the port and
select Bring All Interfaces Into Service.
take an interface out of service Right-click on the channel(s) and a menu appears. Select Take
Selected Out of Service.
delete an interface From the Channel Configuration page, right-click the channel(s)
and a menu appears. Select Delete Selected Interfaces.
or
From the Front Panel or the Device Tree, right-click the port and
select Delete All Interfaces.