manualshive.com logo in svg

Lucent Technologies PacketStar 20N32, Руководство пользователя

Lucent Technologies PacketStar 20N32 - продукт для высокоскоростной передачи данных. Инструкция пользователя доступна для скачивания бесплатно на нашем сайте. Узнайте больше о функциях и возможностях этого устройства, загрузив инструкцию прямо сейчас с manualshive.com.

Поделиться
Скачать
background image

Chapter 1  Getting Started

About the PacketStar PSAX Product Family

1-4

255-700-467

PacketStar

®

 PSAX 4-Port Voice 2-Wire Office Module User Guide

, Issue 1

Release 9.0.0

PSAX 2300 Multiservice Media Gateway

The PacketStar PSAX 2300 Multiservice Media Gateway offers carrier-grade, 
high-density multiservice ATM access functions. Designed as the multiservice 
media gateway for the central office or for a large enterprise customer, the 
PSAX 2300 system provides network access for time-division multiplex 
voice, frame relay, 10/100BASE-T Ethernet, and ATM data applications. 

When it is functioning in a redundant operating mode and after it has experi-
enced a single-point failure, the PSAX 2300 system provides up to 1.9 Gbps 
of ATM cell bus capacity. The total ATM cell bus capacity of the system may 
also be scaled to provide nonblocking, nonredundant chassis bandwidths 
beyond 1.9 Gbps. 

Supporting 15 slots for I/O and server modules—with provisions for OC-3, 
OC-3c/STM-1, and OC-12c/STM-4c interfaces with 1:1 protection, 1:1 DS1 
module protection switching, and a full range of interfaces such as DS0A, 
DS1/E1, DS3/E3, 10/100BASE-T Ethernet, and serial—the PSAX 2300 sys-
tem solves demanding and diverse network design challenges with ease. 

PSAX 4500 Multiservice Media Gateway

The PacketStar PSAX 4500 Multiservice Media Gateway provides carrier-class 
reliability, with an unmatched range of service capabilities, end-to-end traffic 
prioritization, “any-service, any-channel” flexibility, and breakthrough voice 
technology. Ideal for the central office or a large enterprise multiservice 
media gateway, the PSAX 4500 system provides highly reliable network 
access for time-division multiplex voice, frame relay, 10/100BASE-T Ether-
net, and ATM data applications.

When it is functioning in a redundant operating mode and after it has experi-
enced a single-point failure, the PSAX 4500 system provides up to 4.2 Gbps 
of ATM cell bus capacity. The total ATM cell bus capacity of the system may 
also be scaled to provide nonblocking, nonredundant chassis bandwidths 
beyond 4.2 Gbps. 

The high-performance midplane design supports 15 interface slots. Module 
protection for two groups of four or six multiport DS3, STS-1e, or E3 mod-
ules is provided via an N:1 protection scheme using rear access line interface 
modules. The protection module provides backup so that on the failure of 
any one of the modules in a group, traffic is maintained. A single PSAX 4500 
system at the edge of the carrier network can transition traffic from a large 
number of network customers over high-speed DS1/E1 IMA, DS3/E3, OC-3, 
OC-3c/STM-4c, and OC-12c/STM-4c trunks into the ATM core, managing 
the whole quickly and efficiently, down to the individual permanent virtual 
circuit.

Through the use of the latest DSP voice technology, the PSAX 4500 system 
supports advanced voice traffic over ATM (VToA) services for up to 6048 DS0 
channels. As a multiservice media gateway—with H.248 call control, CAS, 
PRI, GR-303, and V5.2 protocols, 3-Port DS3/STS-1e, 1-Port OC-3/STM-1 

Содержание PacketStar 20N32





































































































Отзывы:

Нет отзывов

Похожие инструкции для PacketStar 20N32

Quectel BG96 At Command Manual preview
BG96
Бренд: Quectel Страницы: 23
Quectel BG96 Hardware Design preview
BG96
Бренд: Quectel Страницы: 79
OES ISC-9000 Operational Instructions preview
ISC-9000
Бренд: OES Страницы: 3
KaRo QS Series Manual preview
QS Series
Бренд: KaRo Страницы: 12
Data Signs PTL Compact 2 Operation And Maintenance Manual preview
PTL Compact 2
Бренд: Data Signs Страницы: 23
QUNDIS Q Module WFZ16.Ox Mounting And Installation Instructions Manual preview
Q Module WFZ16.Ox
Бренд: QUNDIS Страницы: 24
Climatisation RC4 Operating Manual preview
RC4
Бренд: Climatisation Страницы: 52
TECOM Challenger v8 Quick Reference User Manual preview
Challenger v8
Бренд: TECOM Страницы: 8
Xylem LOWARA Aquavara IPC Quick Start Manual preview
LOWARA Aquavara IPC
Бренд: Xylem Страницы: 292
NI RMC-8355 User Manual preview
RMC-8355
Бренд: NI Страницы: 135
G-Scale Graphics RailBoss 4 Basic Operation And Installation Manual preview
RailBoss 4 Basic
Бренд: G-Scale Graphics Страницы: 22
Interactive Technologies CueServer 2 User Manual preview
CueServer 2
Бренд: Interactive Technologies Страницы: 431
National Instruments cRIO-9037 Getting Started Manual preview
cRIO-9037
Бренд: National Instruments Страницы: 20
CALEFFI AIR190001 Manual preview
AIR190001
Бренд: CALEFFI Страницы: 6
EKF C20-SATA Technical Information preview
C20-SATA
Бренд: EKF Страницы: 28
Stahl is1+ 9475/32-04 2 Series Operating Instructions Manual preview
is1+ 9475/32-04 2 Series
Бренд: Stahl Страницы: 55
Harman Kardon HE1000A Owner'S Manual preview
Kardon HE1000A
Бренд: Harman Страницы: 2
IDEC SmartRelay Series Manual preview
SmartRelay Series
Бренд: IDEC Страницы: 297

Бренды по названию

Популярные бренды

Загрузить еще бренды