Lucent Technologies Orinoco WavePOINT II, Руководство по началу работы

Страница: 26 / 66

ORINOCO WavePOINT-II - Getting Started 2-7
Installing the WavePOINT-II AP - Hardware Installation
Figure 2-2 Mounting the Power Supply
2. Connect the AC power cord to the power supply unit and mount the
power supply unit at the mid section of the mounting plate as pictured in
Figure 2-2.
Depending on the actual location of the AC wall outlet, you may choose
to route the power cord differently to suit your installation requirements.
3. Use the tie-wraps provided to secure the power cord to the small loops
on the mounting plate at the position where the cords will leave the unit.