Lucent Technologies Orinoco WavePOINT II, Руководство по началу работы

Страница: 41 / 66

3-6 ORINOCO WavePOINT-II - Getting Started
Beyond Quick-Start... - Introduction
Install the AP Manager Software 3
To install the ORiNOCO AP Manager software, proceed as follows:
1. Insert ORiNOCO WavePOINT-II AP software CD-ROM in your
ORiNOCO management station.
If you downloaded the software from the web, please refer to the
installation instructions found on the web.
2. Use your Windows Explorer to open the folder "D:\software\bridge\ap
manager" and locate the file "setup.exe", where “D:\” represents the drive
letter of your CD-ROM.
3. Run the “setup.exe” file to start the installation utility, and follow the
instructions as they appear on the screen.
The setup utility will create a special ORiNOCO group in the Windows
Programs menu, providing you with the key to configure your ORiNOCO
network to fit your requirements.
Previously installed versions of the ORiNOCO AP Manager program will
automatically be replaced, without affecting any other file that you might
have saved into the program’s directory. For example if you saved back-ups
of WavePOINT-II AP configuration files which you created with the previous
version in the WavePOINT-II AP program folders, these files will not be
deleted or overwritten.