Lucent Technologies Network Access Module Скачать руководство пользователя | Manualshive

Страница: 11 / 75

background image

xi

About This Guide

The MERLIN MAGIX Integrated Network Access (INA) Installation and Configuration Guide
provides installation and configuration instructions for the MERLIN MAGIX Integrated
System (IS) Integrated Network Access (INA) module. The routing functions of the
module are based on Lucent Technology’s PortMaster® series of products. The operating
software for the module is the PortMaster ComOS® operating system.

The operating software for the router is the PortMaster ComOS release 4.1.5 and later
releases.

Audience

This guide is designed to be used by qualified system administrators, network managers
and qualified MERLIN MAGIX vendors and installers. Knowledge of basic networking
concepts is required to successfully install the INA module.

Related Documentation

The following MERLIN MAGIX and PortMaster documentation provides additional
information about those products.

MERLIN MAGIX Documentation

The documents listed in the following table are part of the MERLIN MAGIX
documentation set. To order, contact the Lucent Technologies BCS Publications Center
by calling 1 800 457-1235 within the continental United States..

Document No.

Title

555-710-100

Customer Documentation Package:

Consists of paper versions of the System Manager’s Quick
Reference, the Feature Reference, and System Programming

555-710-110

Feature Reference

555-710-111

System Programming

555-670-112

MERLIN LEGEND® Communications System, Release 7.0,
System Planning

555-710-112

System Planning Supplement

555-710-113

System Planning Forms

555-710-119

System Manager’s Quick Reference

«
...
9
10
11
12
13
...
»

Содержание Network Access Module












































































Отзывы:

Нет отзывов

Похожие инструкции для Network Access Module

Бренд: iDirect Страницы: 60

Бренд: JB Systems Страницы: 24

Бренд: JB Systems Страницы: 61

Бренд: Niveo Страницы: 155

Бренд: Konica Minolta Страницы: 38

Бренд: Western Digital Страницы: 8

Anybus Communicator ABC4021

Бренд: HMS Networks Страницы: 60

Бренд: Leviton Страницы: 4

3C8567 - SuperStack II NETBuilder SI 567...

Бренд: 3Com Страницы: 6

JetFusion 2100 Series

Бренд: Paradyne Страницы: 296

Бренд: PairGain Страницы: 80

Бренд: RTS Страницы: 3

B-Control Fader BCF2000

Бренд: Behringer Страницы: 13

Бренд: ADTRAN Страницы: 2

Бренд: Tripp Lite Страницы: 3

EdgePoint EP-R8

Бренд: Ubiquiti Страницы: 22

Бренд: Paradyne Страницы: 46

Бренд: Tenda Страницы: 74

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды