DEFINITY ECS Release 6
System Description Pocket Reference
555-230-211
Issue 2
January 1998
Page 116
Technical Addendum
Maintenance Error Codes
(continued)
Technical Addendum
Error
Code
Description
Action
&$
'66/,3$/$50
:
Slip count reached 88.
Usually no action. Check
T1 facility. If problem
persists, contact NSAC
Tier III.
0DLQWHQDQFH
→
6ORW
→
(UURU(YHQWV
→
&XUUHQWKU
&%
+$5':$5(,123(5$7,9(
:
Hardware not operating
properly. If this is the only
100D module or 800 NI-BRI
module, or if this is the
designated clock module,
its TDM bus clock generator
was not activated.
A Busy-Out/Restore or
Reset/Restore may clear
problem. If problem
persists, contact NSAC
Tier III.
&&
%5,/2662)6<1&
:
Service on link has been
lost.
Usually none; check BRI
facility. If problem
persists, contact NSAC
Tier III.
&'
%5,6/,36!
:
Slip count > 88. Service on
link is still operative.
Usually none; check BRI
facility. If problem
persists, contact NSAC
Tier III.
&(
%5,1(75(48(67('
&&5&V
:
Outgoing signal to the
network does not have valid
framing information. Service
on link is still operative.
Usually none; link should
return to normal once test
is completed. If problem
persists, contact NSAC
Tier III.
&)
%5,1(7'($&7,9$7(
:
Layer 1 of the link is down.
Service on link has been
lost.
Usually none; link should
return to normal once test
is completed. If problem
persists, contact NSAC
Tier III.
&
%5,1(7,19%'/%
$&7
:
Service on link has been
lost.
Usually none; link should
return to normal once test
is completed. If problem
persists, contact NSAC
Tier III.