Lucent Technologies CAJUN P332MF, Руководство пользователя

Страница: 86 / 134

Chapter 6 Cajun Campus CLI – Layer 2
72 Cajun P332MF User’s Guide
Example:
To enable SNMP ConfigChange traps to a specific manager:
Cajun_P330-N# set snmp trap 192.122.173.42 enable config
SNMP config change traps enabled.
To enable all traps to a specific manager:
Cajun_P330-N# set snmp trap 192.122.173.42 enable all
All SNMP traps enabled.
To disable SNMP config traps to a specific manager:
Cajun_P330-N# set snmp trap 192.122.173.42 disable config
SNMP config traps disabled.
To add an entry in the SNMP trap receiver table with default:
Cajun_P330-N# set snmp trap 192.122.173.42
SNMP trap receiver added.
Set snmp trap auth Command
Use the
set snmp trap auth
commands to enable/disable the sending of
SNMP traps upon SNMP authentication failure.
The syntax for this command is:
set snmp trap {enable|disable} auth
Example:
Cajun_P330-N# set snmp trap enable auth
Authentication trap enabled
Set snmp retries Command
Use the
set snmp retries
command to set the number of retries initiated by
the Device Manager application when it tries to send SNMP messages to the device.
The syntax for this command is:
set snmp retries <number>