Lucent Technologies CAJUN P332MF, Руководство пользователя

Страница: 59 / 134

Chapter 6 Cajun Campus CLI – Layer 2
Cajun P332MF User’s Guide 45
Show port Command
Use the
show port
command to display port status.
The syntax for this command is:
show port [<mod_num>[/<port_num>]]
Example:
To display the status for port 4 on module 3:
Cajun_P330-N> show port 3/4
Port Name Status Vlan Level Neg Dup. Spd. Type
------ --------------- --------- ---- ------ ------- ---- ---- -------------
3/4 John connected 1 normal enable half 10M 10/100Base-Tx
Show Port Output Fields
mod_num (Optional) Number of the module. If you do not specify a
number, the ports on all modules are shown.
port_num (Optional) Number of the port on the module. If you do not
specify a number, all the ports on the module are shown.
You can also specify a range of ports separated by a dash, e.g.
5-13 for ports 5 to 13.
Field Description
Port Module and port number
Name The name you assigned to the port
Status Status of the port (connected, faulty, disabled)
VLAN VLAN ID of the port
Level Priority level of the port (normal or high)
Neg The autonegotiation status of the port (enable, disable)
Duplex Duplex setting for the port (fdx, hdx)
Speed Speed setting for the port (10, 100).
Type Port type, for example, 10BaseT, 10BaseFL, 100BaseTX,
100BaseFX MM, 100BaseFX SM, 10/100BaseTX