ASSEMBLY AND INSTALLATION
• Suitable for use with mains voltage of 220-240Vac.
• Luminaire suitable for surface mounting or
suspension mounting
• Product only suitable for indoor use
• This product must be disconnected before insulation
resistance testing of the lighting circuit
• Check for electrical cables and pipes before
installation
1.
Remove 1 end cap by loosening central screw
and pulling end cap from main body.
2.
Slide diffuser along body slightly (a), and lift to
remove (b).
3.
Identify a suitable mounting position, install
Academy Base using suitable fittings. Ensure
surface is suitable for installation. For fixing
hole locations, please see table on next page.
4.
For suspension mounting, LWSK415 is required
(sold separate) this must be fitted to the further
mounting holes (c)
5.
Insert cable into fitting, either using rear
cable entry, Besa fixing points or end mounted
counduit entry.
Part Code:
1260mm:
LAC12P22S40, LAC12P22S40MW, LAC12P40S40, LAC12P40S40MW
1560mm:
LAC15P32S40, LAC15P32S40MW, LAC15P60S40, LAC15P60S40MW
1860mm:
LAC18P45S40, LAC18P45S40MW, LAC18P80S40, LAC18P80S40MW
LED Academy
Opal Prism
Installation & Operating Instructions
Tech Help Line
UK -
0845 194 7584
Non UK -
+44 (0)1952 238 100
Visit our website at
Luceco is a registered trade mark of Nexus Industries Ltd.
Supplied by
BG Electrical Ltd
Stafford Park 1 TF3 3BD ENGLAND
www.luceco.uk
LACV1MB10.2015
NOTE – To comply with regulations, Installation must be carried out by suitably
qualified competent person and in accordance with the current IEE Wiring
Regulations (BS7671) and Building Regulations. A copy of the instructions must
be left for the user/Maintenance engineer for future reference.
For Non-UK, Please refer/consult local requirements
ENSURE ELECTRICAL SUPPLY IS DISCONNECTED/
ISOLATED BEFORE COMMENCING INSTALLATION
2
3
1
a
b
C
A
B
D
3
WARRANTY
year
standard
CRI
80
>
IP20
RATED
50,000
HOURS
1
WARRANTY
year
on site
4000K
NEUTRAL
WHITE