Installation & Operating Instructions
Academy
BESA Length (A)
BESA Width (B)
Surface Mounting
Length (C)
Surface Mounting
Width (D)
Surface Mounting Width
LAC12P - 1260mm/4ft
800mm
35mm
926mm
55mm
LAC15P - 1560mm/5ft
800mm
35mm
1420mm
55mm
LAC18P - 1860mm/6ft
800mm
35mm
1680mm
55mm
Environmental Protection W.E.E.E (Wheelie Bin Symbol)
This symbol is known as the “crossed-out” wheelie Bin Symbol”. When this symbol is marked on a product or battery, It means that it should not be disposed of
with your general household waste. Some chemicals contained within electrical/electronic products or batteries can be harmful to health and the environ-
ment. Only dispose of electrical/electronic/battery items in separate collection schemes, which cater for the recovery and recycling of materials contained
within. Your co-operation is vital to ensure the success of these schemes and for the protection of the environment.
United Kingdom Warranty
For other territories and for further information, please see www.luceco.uk for details
Products are protected by warranty for a period of 3 year warranty, from date of purchase against defects in material and workmanship (unless otherwise stated).
Should a product fail to perform as described within the warranty period it will be repaired or replaced with the same or equivalent product by Luceco, free of
charge provided that you: (1) return the product to us with shipping charge prepaid, (2) provide us with proof of the original date of purchase and (3) quote our return
authorization number.
Repaired or replaced products will be returned to you with shipping charges prepaid. Replacement products may be refurbished or contain refurbished materials. If in
our sole discretion, we are unable to repair or replace a defective product, we will refund the purchase price of the product.
This warranty will not apply if in our judgment, the product fails due to damage in shipment, handling, storage, accident, abuse or misuse, or if it has been used in a
manner not conforming to our product instructions, has been modified in any way, or has any serial number removed or defaced. Repair or attempted repair will void
this warranty. Our maximum liability under the terms of this warranty is limited to the purchase price of the product covered by the warranty.
The warranty is given under English Law. If any part of this warranty is deemed unenforceable (including any provision in which we exclude our liability to you) the
enforceability of any other parts of the warranty will not be affected. These terms do not reduce your statutory rights.
THESE TERMS AND CONDITIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
Eventually, you may want to replace this fitting;
Tech Help Line
UK -
0845 194 7584
Non UK -
+44 (0)1952 238 100
Visit our website at
Luceco is a registered trade mark of Nexus Industries Ltd.
Supplied by
BG Electrical Ltd
Stafford Park 1 TF3 3BD ENGLAND
www.luceco.uk
LACV1MB10.2015
6.
Connect to the electrical supply, observing correct polarity.
7.
Refit diffuser by sliding along the base channel until secure at other end.
8.
Refit end cap ensuring correct fit, and tighten screw to secure.
9.
Turn on power and operate the Academy fitting as required.
Microwave Sensor
Versions fitted with a MicroWave Sensor allow the fitting to automatically switch on
when movement is detected.
MW sensor is supplied, pre-set to its optimum settings, but can be adjusted to suit
requirments.
The MW sensor has a LED that will flash to show how the sensor is set.
1. Detection range
Maximum range of upto 10M max, based on ceiling mounting height of 2.5M. 1 flash-
1M, 5 flashes - 5M, 10 flashes - 10M.
2. Switch On/Off time delay
The luminaire can be set to stay ON for a period of time between approx 10 seconds to
a maximum of 30 minutes. Any movement deteted during the ON time will reset the
timer. 1 flash-10 sec, 2 flashes-1 min, 3 flashes-2 min, 4 flashes-5 min, 6 flashes-10
min, 8 flashes-20 min, 10 flashes-30 min.
3. Ambient light
By detecting ambient light, the luminaire will only switch on when the light is below
the set Level. 2-2000Lux.
Fully anti clockwise is 2 Lux, fully clockwise is 2000Lux.
Must be set to max, fully clockwise, to perform walk test to configure detection zone.
7
8
3
2
1
a
b
