ARRAY DC Fan Installation Instructions
9 |
P a g e
INSTALLATION OF LIGHT KIT (Fig. 11)
NOTE:
The light kit must be installed by a licensed electrician.
1.
Loosen the screw (1) from the fan bracket. (Fig. 11)
2.
Align the two slot screws with the keyhole slots (2) of the light kit plate. (Fig. 11)
3.
Turn the light kit plate counterclockwise until the slot screws are firmly at the end of the slots (2).
4.
Secure screw (1) to the lamp shade bracket. Tighten all three screws. Do not over-tighten.
INSTALLATION OF LAMP (Fig. 12)
• Install the lamp on the fan assembly then secure it by turning clockwise. (Fig. 12)
Fig. 12
Fig. 11
