Installation Instructions
4 | P a g e
v 1 . 0 ( 1 0 / 2 0 1 8 )
SENSOR TESTING:
•
Slide the LUX control switch S1 (
) to the left position and the TIME control switch S3 (5”) to the right position.
Turn the wall switch on and the light will turn on and remain on for about 15 seconds for the “warm-up” mode. After
this initial “warm up” mode the light will turn off and the luminaire will be in AUTO MODE.
•
Have someone walk across the centre of the area to be scanned until the luminaire can sense the moving person
and causes the light to switch on.
•
Adjust the TIME control switches (S3-S8) to the desired length of time for the luminaire to remain on.
•
Adjust the LUX control switch to achieve the ideal ambient light for the luminaire to switch “on”.
MANUAL MODE: (Sensor Override Function)
Manual mode is used when you want the LED lights to be constantly on. The PIR sensor will be disabled and not affected
by the duration time and lux level settings. The maximum duration for manual mode is 24 hours.
•
During normal use the wall switch is in the ON position and the luminaire is in AUTO MODE with the PIR sensor
detecting any movement and the LED lights will switch on and off accordingly.
•
To switch into MANUAL MODE, turn the wall switch off and on twice within three seconds.
Wall switch action: OFF
→
ON
→
OFF
→
ON.
Wait for 3 seconds and the LED lights will turn on and the luminaire will be in MANUAL MODE.
NOTE: If the wall switch action is done only once or more than twice, the luminaire will not enter into MANUAL MODE.
•
To change back to AUTO MODE, turn the wall switch off and on, the luminaire will enter “warm-up” mode and the
LED light will remain on for about 15 seconds. After this the LED lights will turn off and the luminaire will be in AUTO
MODE.
Wall switch action: OFF
→
ON
Safety tips
•
Always ensure the power is OFF and the luminaire has cooled down before performing any maintenance, cleaning,
changing the globe or making any adjustment to the luminaire.
•
To avoid injury or damage to the luminaire, ensure that power leads and screws are secure before connecting the
power.
•
The luminaire must not be used if the shade has been cracked. Replace any cracked protective shield.
•
Ensure that the luminaire does not come in contact with corrosive chemicals/solvents or abrasive cleaners etc.
•
To clean, wipe with a damp clean cloth. Do NOT soak or immerse the product in water or other liquids.
Specifications
SKU #
240735
240736
240737
Colour
Black
304 stainless steel
316 stainless steel
Rated Voltage
220-240V~ 50Hz
Rated Wattage
20W Max. (Use 2 x Max.10W globes, LED Only)
Lamp Holder
GU10
IP Rating
IP65
Weight
0.9kg
1.6kg
1.6kg
Dimensions
H:250mm W:310mm E:215mm
