11
USER MANUAL
User manual
6 . 3 i n s t r u c t i o n s f o r a c o r r e c t O P E R A T I O N
The correct sequence the operator must execute is as follows.
1_ Check that the shampoo unit is correctly positioned on a flat lavelled surface
and that it is not wet or has signs of damage.
2_ Check that the working environment is suitable with correct lighting
and correct ventilation.
3_ Check that the shampoo unit is correctly connected to the hydraulic circuit
so that warm and cold water are available and it is possible to mix
them to obtain the right temperature.
4_ Check that the water used to wash hair is correctly drained (check that the
drainpipe is not clogged).
5_ Check that the power supply cable and the plug are not damaged.
6_ Check that the socket’s power supply is 100/220-240 V ~ 50-60 Hz.
In case of anomalies during these checks, the operator should inform
the person in charge.
7_ Put the plug in the socket.
8_ Seat the client on the chair.
9 _ If requested, use the appropriate push-button panel to start and stop the massage
movement, as shown in figure 3.
NB. Each button has to be held down to for 1 second
IN ORDER TO AVOID
UNWANTED ACTIONS.
The massage cycle lasts 3 minutes. To stop the massage use the stop-button, as
shown in figure 4.
AFTER 3 MINUTES IT WILL STOP INDEPENDENTLY.
EN
