3. When the battery is fully charged, unplug the USB cable or AC adapter from your headset.
Note: The first time you charge the battery, leave your headset connected to the USB cable or
AC adapter at least two hours.
Note: When the battery charge is low, the red KED flashes and an alarm sounds.
Turning your headset on or off
To turn on your headset:
•
Press and hold the talk button for about three seconds. The blue LED starts blinking.
Note: If you press and hold the talk button for six seconds, your headset goes into pairing mode.
For more information see “Pairing your headset” on page ???
To turn off your headset:
•
Press and hold the talk button for about three seconds
Pairing your headset
To pair your headset:
1.With your headset turned off, press and hold the talk button for six seconds. The blue and red
LEDs flash rapidly
2.When your headset is in pairing mode, select
RF-BTHP01
from the list of discovered devices
on the phone.
3.On the phone, enter the password
0000
to pair your headset.
Connecting the phone and your headset
Connecting from the phone
Select
RF-BTHP01
from the list of paired devices on the phone.
Connecting from your headset
When you turn on your headset, it automatically connects to the last device it was connected to.
Multi-pairing method
Before you can connect your headset to two devices, you must pair to each device individually
using the appropriate profiles, For phone conversation, use the HSP or HFP profile. For high
quality audio, use the A2DP profile.
A profile can only connect one device at a time. For example, you cannot use a phone’s MP3
payer and a computer’s MP3 player at the same time, because both players are connected through
the A2DP profile.
