Jabra PRO 9470 Manual Download

Page: 1 / 4

Maxwell 10 - Jabra PRO Headset

Introduction

How to connect your Jabra PRO with the Maxwell 10

Gigaset tested this with the following devices.

Maxwell 10 Software 1.2.0 and 1.2.18, Hardware version 28 or higher is needed.
Jabra PRO 9470
Jabra Link 14201-10 DHSG cable.

Gigaset cannot support you with questions about the Jabra Headset, for this contact your supplier.

Connection

Plug the 1-sided end of the DHSG cable into the Maxwell

socket.

EHS

Insert the RJ9 plug of the DHSG cable into the headset base socket marked with a "phone" symbol
and the RJ45 plug into the socket marked with "AUX".

Then follow the instructions of the Jabra PRO base SmartSetup Wizard.

Summary of Contents for PRO 9470

Page 1: ...9470 Jabra Link 14201 10 DHSG cable Gigaset cannot support you with questions about the Jabra Headset for this contact your supplier Connection Plug the 1 sided end of the DHSG cable into the Maxwell...

Page 2: ...Select phone settings then Connect to a desk phone Desk phone Manual Select adapter type DHSG Set the phone setup switch to position A...

Page 3: ...the call then the Headset connection will be disabled because it was already active You need to press again to answer the call The recommended setting for EHS headsets is to disable this feature Open...

Page 4: ...this the headset connection is switched Off and On again Solution is to use only the G 722 codec A future change in the Maxwell 10 is planned to improve this Introduction Connection Signalling of inco...