Jabra Link 14201-10
How to connect my Jabra GN9330e with Aastra Office 70 and
80 or Aastra 5370 and 5380
Prerequisite:
Jabra G Jabra LINK 14201-10
In combination with one of the following phones:
Office 70 / 70 IP or 5370 IP
Office 80 / 80 IP or 5380 IP
Connection:
Important:
Please note that remote call control for the Jabra GN9330e is
only supported from version "L" or the Date code 9/09.
1. Plug the 1-sided end of the DHSG cable marked blue into the socket of
your phone marked with the "headset" symbol.
2. Insert the split end of the DHSG cable into the Jabra GN9330e base.
Insert the RJ9 plug into the socket marked with a "phone" symbol and
the RJ45 plug into the base socket of the Jabra GN9330e marked
"AUX".
Software setup:
Put the headset into the base and activate the "DHSG" mode.
Hold down the "phone" button on the base of the Jabra GN9330e for
approx. 6 seconds until the online display (blue LED) on the headset starts
to flash. The current software is displayed to you by activating the volume
controller in the form of the charge display (green LED).
14/10/2022 07:08
https://www.emea.jabra.com/supportpages/jabra-link-14201-10/14201-10/faq/e76b2e37-
c6b7-4385-b58b-d0e52d83fd4f
Page 1 of 3
