background image

Top climate system 

with LUBING Touch Controller

Copyright © Lubing System - All rights reserved

4

 

INDEX

IT

1. INTRODUCTION.......................................................................................................................6

1.1  Description LUBING Top climate system......................................................................................6
1.2  Notational conventions................................................................................................................6

1.3  Warranty and liability....................................................................................................................7
1.4  Copyright....................................................................................................................................7
1.5  Guarantee terms.........................................................................................................................7

 2. 

SAFETY......................................................................................................................................8

2.1  General safety information...........................................................................................................8
2.2  Safety measures before startup...................................................................................................8
2.3  Safety measures during normal operation....................................................................................8
2.4  Intended use...............................................................................................................................8
2.5  Hazards due to electricity.............................................................................................................9
2.6  Further hazards...........................................................................................................................9

2.7  Personal protective equipment...................................................................................................10

2.8  Safety devices and guards.........................................................................................................11
2.9  Obligations of the plant operator................................................................................................11

2.10  Personnel requirements...........................................................................................................11

2.10.1 Responsibilities..............................................................................................................11

2.10.2 Qualifications required by personnel................................................................................12

2.10.3 Obligations of personnel.................................................................................................12
2.10.4 Unauthorized persons....................................................................................................12

2.11  Instruction...............................................................................................................................12

  3. 

TRANSPORT AND STORAGE.................................................................................................13

3.1  Transport..................................................................................................................................13
3.2  Storage.....................................................................................................................................13

 4. 

ASSEMBLY INSTRUCTION....................................................................................................14

4.1  Installation of the pump unit.......................................................................................................14

4.2  Installation of the filter unit.........................................................................................................14

4.3  Installation of additional modules...............................................................................................16

4.4  Installation LUBING Touch Controller..........................................................................................17

4.4.1 Connection of external climate computers and sensors....................................................18
4.4.2 CAN connection...............................................................................................................18

4.5  Installation of connecting pipes and nozzle lines.........................................................................18

4.5.1 Positioning and orientation of nozzle lines..........................................................................19
4.5.2 Cutting ring fittings...........................................................................................................20
4.5.3 PressFix fittings................................................................................................................22

4.5.4 Wall mounting of connecting pipes and nozzle lines..........................................................22
4.5.5 Suspended mounting of nozzle lines with tension wire......................................................23
4.5.6 Suspended mounting of nozzle lines with support pipe (for height adjustment)..................23

4.5.7 Installation of nozzles........................................................................................................25

4.5.8 FlexClamp system............................................................................................................25
4.5.9 Installation of section valves (Vario systems).......................................................................26

4.6 Last steps of the assembly........................................................................................................26

 5. 

OPERATORS MANUAL..........................................................................................................27

5.1  First start-up.............................................................................................................................27
5.2  Temporary shut-down and restarting.........................................................................................27
5.3  Water quality.............................................................................................................................27
5.4  Disinfection/medication.............................................................................................................27

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

Содержание 7113



























































Отзывы: