Top climate system
with LUBING Touch Controller
Copyright © Lubing System - All rights reserved
13
3. TRANSPORT AND STORAGE
For the multitude of possible system components, only general information can be given here. For transport
specialists and experienced fitters these are usually sufficient. If in doubt, please consult us.
3.1 Transport
The system is supplied in pre-assembled modules and in different packaging units. These are to be secured by
suitable devices against slipping and tilting during transport. Avoid shocks and impacts. The components may only
be transported by appropriately qualified and instructed per- sonnel and in compliance with all safety instructions.
Wear protective clothing, safety shoes, protective gloves and a safety helmet during the work. Also read section
2 “Safety”.
When selecting suitable lifting and transport equipment, always take into account the weight of the heaviest
component. When transporting by hand, take into account the reasonable human lifting and carrying forces.
3.2 Storage
If the system components are not installed immediately after delivery, they must be carefully stored in a
protected place. The components must be temporarily stored in such a way that they are protected from
cold, moisture, dirt and mechanical influences.
Before installation, store the components where they will be installed so that their temperature can adapt
to the environment.
WARNING
Risk of injury from components with high weight and sharp edges!
Improper transport and non-compliance with the safety instructions can lead to crushing or cutting injuries.
IMPORTANT INFORMATION
No liability will be accepted for damage caused by improper storage.
