2.2.2
Ceiling/Wall Mounting with Gang Box
You need to purchase a gang box separately if you adopt celling
mounting.
Steps:
1.
Take apart the gang box and align the screw holes of
the bullet camera and the gang box cover.
Figure 2-8
Gang Box
2.
Route the cables through the cable hole of gang box
and fix the camera with the gang box cover with the
supplied screws, as shown in Figure 2-9.
Screw
Gang Box Cover
Figure 2-9
Fix the Camera with the Gang Box
3.
Drill the screw holes in the ceiling/wall according to
the supplied drill template.
4.
Hammer the supplied screws into the screw holes to
fix the gang box to the ceiling/wall.
Screw
Figure 2-10
Fix the Camera to the Ceiling
5.
Connect the corresponding cables and install the
gang box cover with fixing screws.
Figure 2-11
Fix the Camera to the Ceiling/Wall
6.
Refer to step
5
of
to adjust the camera to get
an optimum angle.
