With Up/Down select one of the 6 possible EQ type (ex. Parametric mono 1
60). Selection is shown reversing
the item.
To confirm press enter. The following warning will be shown to the user:
At the end the user will be presented with a window containing the updated preset.
To return to the main menu, select RET and press
.
ENTER
9
With this function the user can set the MIDI configuration. This is the starting screen.
With Up/Down the user can select the MIDI channel and/or the output enable. The selection is shown reversing
the item.
d. MIDI Setup
8
b. Store Preset
If confirmed, the new name will be shown in the left lower corner and in the preset field.
To return to the main menu, select RET and press.
With this function it's possible to change the EQ type.
c. EQ. Type
To load the preset. If the EQ is Dual Mono (DM), first choose the channel with the Channel key. It is very
important that the preset to be loaded belong to the same type (PAR ST, MN, etc) indicated in the upper
right corner to the window. If the user tries to load a different type or EMPTY preset, a warning "NO LOAD-
ING" will be shown. To return to main menu select the item RET and press
.
ENTER
With this function the user can store a preset into one of the
cations available to the user. This is
63 lo
the access screen.
In this window the user can find the position in which to save the current preset. With up/down it's possible
to select the item RET or the field preset; selected items are graphically reversed.
To save a preset the item Preset has to be selected, with the dial it's possible to choose the desired position
and lastly press
to save.
ENTER
After saving the preset a string of characters will be shown, in which the user will edit the preset's name
(max. 8 characters). With Left/Right it's possible to move inside the string, the dial selects the blinking
char, Enter confirms, Esc cancels operation allowing to retain the old preset's name.
If confirmed, the system will load the new EQ type with a default preset. Whatever editing info which was
not stored will be lost.
Use
key to select one of the 4 fields. Use
to access selected function
UP/DOWN/LEFT/RIGHT
ENTER
sub-menu.
If the CONTROL60 is already working on UTILITY menu, each further use of the button will have no effect.
