LT LTC-0005A, Руководство пользователя

Страница: 27 / 39

Zhengzhou Linghang Robot Co.,Ltd
24
10
、
Check hoses for interference, abrasion, cuts and leaks. Replace as needed.
11 、 Check seal rings for abrasion, cuts and leaks.
12
、
Inspect electrical contacts/pins for damage, debris and stuck/charred pins.
Remove or replace as required.
5.2 Cleaning and lubrication of locking mechanism and locating pin
Needed goods: Cleaning cloth, Mobil XHP222 extra grade grease
1.Pls put tools in safety place.
2.Unlock master plate and tool plate.
3.Cut off all power supply (such as electric, Pneumatic etc).
4.Use a clean cloth remove any lubricants and debris from ball bearings, ball
bearing housings, cams and locating pins thoroughly.
5.Use a clean cleaning cloth to remove all lubricants and debris from the ball
bearing housing and the inner surface of the CAM.