LT-Light TRITTON-24, Руководство пользователя

Страница: 48 / 78

User Manual - Lesson 7 - Setup
42
&
LT
•
LF appears if all channels have their LIMIT at 100%, by default.
•
C1 appears if all channels have assigned the curve 1, by default.
In the upper line we find:
•
Patch. To return to the previous menu (SETUP).
•
EDIT. To edit the patch.
•
DFT (Patch by default). To return to the default patch. After this command, always, appear the
flags c1, LF & C1.
EDIT, edits the channel patch
Select the EDIT option, in the display pressing
n
EDIT
n
ENTER:
n
1
n
c1 LF C1
2 c2 LF C1
To edit the patch we use the format of numerical sheet, similar to the used in the edition of the
sequence and chases. Remember: Access to the desired cell and enter the numerical data.
In the display, we can see two dimmer channels at the same time. The dimmer channels, in the first
column, are not editable. We have 512 dimmer channels.
From left to right we find:
1
It is the number of the dimmer channel. This data is not editable. In the cells of dimmer channel
number we can use a displacement function:
•
Enter the dimmer number we want edit.
•
Press the
à
key. (The System goes to this dimmer channel)
Or we can displace us using
↑↑
and
↓↓
to displace us at the desired dimmer channel.
c1
It is the number of control channel that it is controlling the dimmer channel, which it is just in the
previous cell. We can enter any number from 1 up to 24, 36 or 48, respectively for TRITTON of
24, 36 or 48 control channels.
LF
It is the valour for the LIMIT function: the maximum level for the dimmer output. The dimmer
output never will be more level. You can enter valour from 0 up to 100. The 100 level is marked
like F, (full), the channels are not limited.
When we have a LIMIT different to 100%, its assigned curve is recalculate between 0% and the
LIMIT valour.