LT-Light TRITTON-24, Руководство пользователя

Страница: 35 / 78

User Manual - Lesson 5 - Main Menu - The Sequence
LT
&
29
The displacement of the sequence
There are two modes to interrupt the sequential order of the crossfades, one programmed, editing
jumps in the sequence. Basically is one indication of the next step to fade after the step with the
programmed jump. For example, in the step 56, enter a jump to step 1 (J1), so, when the step 56 is
in scene the next step will be the step 1 (now in X2). And other with the INSERT function. With
this function, at any time, we can:
•
Enter the step number and press INSERT GO: Inserting in X1 (scene) the indicated
step.
•
Enter the preset number and press . (dot) INSERT GO: Inserting in X1 (scene) the
indicated preset. If this preset number is in more than one step, in X1 is located the first
step with this preset.
•
Enter the step number and press INSERT GO-BACK: Inserting in X2 (next step in
scene) the indicated step. There is not light jump in scene.
•
Enter the preset number and press . (dot) INSERT GO-BACK: Inserting in X2
(next preset in scene) the indicated preset. There is not light jump in scene.
•
1 INSERT INSERT (double click): Places the sequence in initial position.
•
Enter the step number and press INSERT INSERT: places the step 0 in X1 and the
indicated step in X2.
•
Enter the preset number and press . (dot) INSERT INSERT: places the step 0 in
X1 and the indicated preset in X2.
To program a jump, JUMP, or with the displacements with the INSERT function, we can use de
number of the step or of the preset. To indicate that we enter a preset number, only press
•
, (dot)
after the numerical data. (Format ###. ).
EDITING THE SEQUENCE
From the SEQ menu, we can edit the sequence completely. Enter in this menu and note the change
of the display.
This display shows us a numerical sheet, we have to place us in the appropriated place and enter the
desired data. In general, to move us by the "sheets" use the arrow keys, and to enter the numerical
data use the numerical keyboard.
Select the SEQ command in the main menu: Push the
à à
key, (
n
SEQ
n
, placing the cursors in the
command SEQ), and press ENTER. Note we have a new display.
In this display the sequence sheet is showed, in the console we only can see two sequence steps.
This display with the empty sequence is:
n
S0
n
P0 J
S1 P J
Where by columns we have: