LT-Light TRITTON-24, Руководство пользователя

Страница: 15 / 78

User Manual - Lesson 3 - Layout & Basic Functions
LT
&
9
MAIN SYSTEM INSTALLATION. COLD RESET
1.- Connect the output cable. 5 pin XLR DMX.
2.- Connect the IEC mains lead.
3.- Press and hold down
ß ß
key (for "cold reset") and switch on the console power, release the key.
The first time that we start the console have to do "cold reset", and each time that we want erase all
recorded data in the console. For the cold reset: Press and hold down
ß ß
key, and switch on the
console power.
After the "cold reset", in the console display we can read (for a short time):
LT COPYRIGHT
TRITTON 24 V1.30
And after, we can see the main menu:
n
Main
n
SEQ >0
MDFY NUM ->
THE MANUAL FIELD: C1..C24 FADERS
•
Locate the general master, GM, at 100%.
•
Confirm that the BLK.OUT & SG.DB keys are not activated (LED off).
From the manual field we have control about 24 console channels:
With the C master (manual field general master) at 100%: When a fader is moved out the its 0%
level, its corresponding control channel outs in scene, with a proportional level to the marked level
with the potentiometer. The associated flash key LED shows us this level.
When we push the channel flash key, and while this is pushed, the channel is at 100% level.
The manual field output is proportional to the C master level. When the C master is in its 0% (the
down end of its travel), there is not manual field output.
Note: The Flash keys are not controlled for the C master.
How to remove the output to scene of the manual field? There are three possibilities:
1. Move the 24 manual field faders at 0%. (Clear the manual field composition)
2. Move the C fader at its 0%. (This process maintains the manual field composition).
3. With the keys sequence: DELETE SG.DB. (Clear the manual field composition).