LT-Light TRITTON-24, Руководство пользователя

Страница: 16 / 78

User Manual - Lesson 3 - Layout & Basic Functions
10
&
LT
There is a second function mode for the manual field: Double Mode. This mode permit us to do
manual fades between two manuals compositions, from the C1..C24 faders.
•
Select Double mode: Push the SG.DB key, (LED on).
In this way, C master works like a crossfade fader, fading between two manual compositions.
•
Locate the C fader in one of its end positions (0% ó 100%):
With the faders C1..C24, perform one composition. Note that we have not output in scene. The
green LED's of the channel flash keys are off.
Move the C fader at the other end position. Note as the manual composition appears in scene
following the C fader movement. At the end of the C fader travelling, the console produces an
acoustic signal, "beep", indicating the end of the fade. The composition is in scene at 100%.
Now, we cam move the manual field faders, to obtain the new desired composition. These faders'
movements still are not showed in the output.
Move the C fader at the other end position. Note as the old manual composition, in scene, fade at
0% and the new manual field composition fades at 100%. Both fades follow the C fader movement.
At the end of the C fader travelling, the console produces a new acoustic signal, "beep", indicating
the end of the fade. Now the new composition is at 100% in scene, and the C1..C24 faders are
ready for the next manual composition.
Repeat this process the desired times.
This mode, Doubling mode, permits us do a manual sequence.
Exit the Double mode pressing SG.DB again (LED off).
CHANNELS GROUPS
The channels groups are created in the masters and only exit within them. The channels groups help
us select channels sophisticated combinations. And in any case, groups can be used like presets in
the masters.
Create a channel group:
Do you a combination channels/levels with the manual faders (C1..C24), for example, all
panoramas at 100%. When the desired picture is in scene, load you this combination in a master,
like a channel group:
•
Push the LOAD key.
•
Push the desired Mn key. (Mn: Associated master key, M1..M12)
•
The light in scene now is in the master.
The red LED of the associated key to the master (Mn) is lit at 50%, this LED shows us that its
associated master has light information. Now you can give this channels group in scene, moving up
the master fader. The green LED is lit at 100%, it shows us that its associated master is in scene.
If we remove the manual field output, and move up the master fader that has this group, we can see,
in scene, the channel group.
We can have up to 800 different groups. The channels groups can be recorded in the master pages.