manualshive.com logo in svg

LSIS LSPV Series, Руководство пользователя, Страница: 24 / 60

Поделиться
Скачать
LSIS LSPV Series Скачать руководство пользователя страница 24

  

 

 

 

 

23 

 

 

WARNING 

 

Live PV strings can be under lethal voltages.

 

⇒

 

Before connecting the PV strings, verify that the open circuit voltage 
does not exceed 50 V. 

 

 

•

  The DC connection is effected with MC4-plugs and sockets Ensure that you use DC 

connectors which are suitable for the particular cable diameter. If you use connectors 
which are not suitable for the particular cable diameter, the protection class of the de-
vice may fall below IP65.  

•

  Whenever it is switched on, LSPV inverter automatically checks the insulation of the 

PV generator. If the insulation is defective, LSPV inverter switches off automatically. In 
this case, it is absolutely mandatory that the insulation fault of the PV generator be re-
paired before the PV generator is connected to LSPV inverter. 

•

  Be absolutely sure to verify proper polarity when connecting the PV strings. Any inap-

propriate connection of individual strings may damage the module strings. The LSPV 
inverter is protected by an integrated polarity reversal protection diode. Protect the 
connectors such that they cannot be pulled off inadvertently. 
 

•

  Close unused connectors with plugs. If you fail to do this, the protection class of the 

device may fall below IP65. 

•

  The connection has to be strictly done according to chapter 2.5 Solar Inverter DC 

Connector of the operating instructions. By non-observance the dc-disconnector can 
be destroyed. 

 

3.13  DC Connecting Line 

Please note the following information (plug type, cross section) regarding the DC power cable 

Denomination  

Type 

Item No. 
MultiContact 

Diameter wire insulation 
in mm 

Cable cross section in 
mm² 

Connector plug 

PV-KST4/6I-UR 

32.0015P0001 

3 -6 

4 - 6 

Connector plug 

PV-KST4/6II-UR  32.0017P0001 

5,5 - 9 

4 - 6 

Connector socket 

PV-KBT4/6I-UR 

32.0014P0001 

3 - 6 

4 - 6 

Connector socket 

PV-KBT4/6II-UR  32.0016P0001 

5,5 - 9 

4 - 6 

 

To attach the crimp contacts on the site, you might acquire the pliers, type PV-CZM -19100 by Mul-
tiContact. 

Note: 

In order to ensure the degree of protection IP65, plug connectors and 
power supply connection cable must be matched to each other and 
all unused connectors shall be fitted with blanking plugs. We suggest 
to use only original components of MultiContact! Please take notice of 
the instruction sheet of MultiContact! 

 

Содержание LSPV Series





























































Отзывы:

Нет отзывов