LSI Mylex PCI Disk Array Controllers Driver, Руководство по установке

Страница: 48 / 104

Installing the Controller into an Existing Windows NT 4.0 System
4-4 PCI Disk Array Controller Drivers Manual
Installing the Controller into an Existing
Windows NT 4.0 System
If Windows NT 4.0 is already installed and you wish to add a Mylex Disk
Array Controller later, the controller will be a secondary (non-bootable)
controller. After installing the controller hardware and configuring a disk
array, follow the procedure below to add the necessary controller drivers.
1. Make sure Windows NT 4.0 is up and running.
☛
Note
When you are ready to insert the driver diskette, do
not install the Accelerated Driver if you will be using
Clustering or PCI Hot Plug.
☛
Note
If Global Array Manager (GAM) is running and you
wish to install the Accelerated Driver, stop GAM first,
install the Accelerated Driver, and then restart GAM.
2. Click Start, and select Settings->Control Panel within the Start menu
(Figure 3-1).
Figure 3-1. Open the Windows NT 4.0 Control Panel
3. From the Control Panel window, double-click the SCSI Adapters icon
(Figure 3-2).