LSI Mylex PCI Disk Array Controllers Driver, Руководство по установке, Страница: 47 / 104

Windows NT
Manual No. DB11-000030-00 4-3
4
W
I
N
N
T
10. If you have drivers to install for other controllers (for example, an
on-board SCSI or IDE controller to run other devices such as a
CD-ROM drive, etc.), repeat Step 6 and Step 7. Then when prompted,
insert the manufacturer’s supplied hardware support disk, press Enter,
and select the appropriate driver from the list.
If you have no other drivers to install, or when you have finished
installing other drivers, simply press Enter to continue installation.
11. Insert Windows NT 4.0 setup diskette #3 when prompted.
12. Follow the on-screen instructions to continue Windows NT 4.0
installation, inserting the Windows NT CD-ROM into the CD-ROM
drive when prompted. Press Enter and continue with the next few
Windows NT 4.0 installation screens.
13. When prompted again for the “Mylex Driver Diskette (Windows NT
4.0)” diskette, insert the NT4/NW Drivers Software Kit diskette into
the floppy disk drive and press Enter. (Use the Mylex Accelerated
Driver Diskette, if prompted for the accelerated driver.)
If you installed other drivers from other diskettes, you will be asked to
reinsert those diskettes as well.
This concludes Mylex Disk Array Controller driver installation for Windows
NT 4.0. Follow the on-screen instructions to complete your installation of
the Windows NT 4.0 operating system.