LS Industrial Systems XBL-PMEC, Руководство пользователя, Страница: 51 / 101

Chapter 5 PROFICON Setting
5 - 19
Remark
1) The following is a description of the exception cases that there are GSDs which have same PNO ID or there is no
module ID when you execute auto network scanning.
a) If between the GSD file and the module are not matched, add Scanned Module. After then you can see the
checked Select button. In case of below, the slave that Scanned Module is added can't be displayed properly. In
order to successfully open, after copying [sys] folder under the PROFICON installation folder of the PC which is
already auto scanned, overwrite the file in same location that you want to open the project. And open the project.
- If you open project files that are already auto scanned in another PC.
- If you upload images that are already auto scanned in another PC.
- If you open it in another PC after saving auto scanned contents as a binary.
b) If there are more than two slaves that have same PNO ID compared with loaded slaves, select button will be
shown.
If the slaves don't have same module ID or the slave is compact slave that have to be defined more than one,
Discard will be shown and Select button will not be shown.
If there are slaves that don't have same PNO ID compared with loaded slaves at the same time modular type
which don't need module, Discard will not be shown and Select button will be shown. It's because PROFICON
judges that the user intends for adding module through Configuration.
- Compact slave: If Modular_Station = 0 is shown in the GSD file or there is no Modular_Station key, the module
have to be defined more than one.
- Modular slave: If Modular_Station = 1 is shown in the GSD file.
c) In case that there are more than two selectable slaves, the Select button is checked. So If you want to change
slave, change the checking status and select the slave that you want.