Maintenace ProtoMat S-Serie
8 / 9
4. Maintenance of the collet
Tools required:
Collet key, collet brush, any drill or milling tool with an 1/8" shaft
Accessory pack ProtoMat
Supplied as standard
•
The inside of the collet can be cleaned at any time without having to dismantle it first. Do this by opening
the collet in Service mode, and pushing the collet brush into the opened collet. Turn and push the brush
backwards and forwards several times. This removes dust particles from the collet.
Collet key S62 and collet brush
Collet key S100 from the machine
accessory pack
•
The collet must be removed from the milling head before it can be completely cleaned. This is done by
first dismantling the working depth limiter, and opening the Service menu in BoardMaster as follows:
•
Press
Configuration
button, and open the tool magazin [B1]dialog. Now press the
Service
button in the
tool dialog, and enter the password [B2]"bmaster". Confirm with
OK
.
•
Open the collet by clicking on the
Open
function
•
To prevent damage to the collet when screwing it off, put the collet key on the shaft of a tool. Place the
tool into the opened collet. Make sure that the collet key is securely fixed around the collet.
