Maintenace ProtoMat S-Serie
2 / 9
1. Maintenance of the transport spindles and linear guides
for the X and Y axes:
Tools required:
Torx 27
Maintenance kit Art. Nr.:
126891 für S100;
126892 für S42/S62
Accessory pack ProtoMat
Supplied as standard
Required:
Brush
Ball bearing grease
Depth limiter grease
Plastic nut grease
•
Switch on the ProtoMat and start the BoardMaster software
•
Move the head of the miller into the center and open the hatch in the cover
•
Pull the two black pins on the right and left hand side upwards and out of the cross member
•
Close the hatch in the cover and run the ProtoMat
to the 0 position. The milling head is now on the left
hand side, and the workpiece holder is at the back of the machine
•
Open the hatch in the cover, and fold the cowling of the cross member to the back
•
Use the brush supplied with the maintenance kit to pick up some plastic nut grease (ISOFLEX plastic
lubricant #102244), and then brush grease onto the transport spindle (1) next to the head of the miller
(spindle nut).
