LPKF MultiPress S, Руководство по эксплуатации

Страница: 6 / 76

Information on this manual
4 MultiPress S Operating manual 3.0 Rev: 3.6.2009
Information on this manual
This manual describes the installation and operation of the LPKF
multilayer press MultiPress S in the following versions:
• MultiPress S with automatic hydraulic system
• MultiPress S with hand pump
Prior to mounting and commissioning of the machine, you must first
familiarize yourself with its function, use and measures required for safe
operation. Owing to the individual intended applications and the base
materials/consumables used, only the general procedure can be
described here. Therefore, prior to using the machine, you should also
read the data sheets of the materials used and observe the application
instructions contained therein.
If, after reading this manual, a situation should arise in which you are
unsure about how to install, use or service the machine, contact the
LPKF Support or consult a person skilled in the art.
As the machine owner, your obligations in connection with this manual
include the following:
• Making sure that the machine is only operated by persons who have
read this manual and/or have been informed about its contents.
• Making sure that the operating manual and all relevant documents
are always within easy reach near the machine in a legible condition
and in their entirety.
Target group
This manual is directed at persons who have basic knowledge in circuit
board production for the electronic sector and want to produce multilayer
printed circuit boards using the MultiPress S hydraulic press. Knowledge
regarding the safety and conduct in electric machine shops and
electronic labs is a prerequisite.
Notations
This chapter gives information on the notations used in this manual.
Bold print
The following information is shown in bold print:
• Switches, operating elements, labeled connections
e. g. power switches.