LP ReadyPeak, Руководство по установке

Страница: 9 / 18

7
LOCKING TOGETHER FIELD PANELS
Align the plank to the flat edges of the ship lap. Be sure the
plank is flat against the truss. There should be a maximun
2˝gap at the roof ridge to allow for ridge cap coverage.
Secure each panel to the roof using two gasket screws
3/4˝from the drip edge through the center of each truss
it covers. These should also be 24˝center to center apart.
Note: Panels should look flush from the inside.
DETAIL A
SCALE 1:40
DETAIL D
SCALE 1:50
Finisher piece to close
the gap from the peak to
the roof to less than 2˝
Rest each panel over top
of the existing one using
the ‘step features’
SCALE 1:80 SCALE 1:75