- Instruction Manual for ESS R050096 -
16
Considering the following points before selecting where to install:
◼
Please select a vertical wall with load-bearing capacity for installation, suitable for
◼
installation on concrete or other non-flammable surfaces, installation is shown below.
◼
Install this inverter at eye level in order to allow the LCD display to be read at all times.
◼
The ambient temperature should be between -25~60
℃
to ensure optimal operation.
◼
Be sure to keep other objects and surfaces as shown in the diagram to guarantee sufficient heat
dissipation and have enough space for removing wires.
For proper air circulation to dissipate heat, allow a clearance of approx. 500mm to the side.
And approx.500mm above and below the unit. And 1000mm to the front.
◼
Mount ing t he inverter
Remember that this inverter is heavy! Please be careful when lifting out from the package.
Choose the recommend drill head (as shown in below pic) to drill 4 holes on the wall, 52-60mm
deep.
(1)
Use a proper hammer to fit the expansion bolt into the holes.
