- Instruction Manual for ESS R050096 -
15
(5)
Unscrew the fixing screws on the right door with a screwdriver, and remove the left and right
doors.
Picture 3-7 Open the side door
(6)
Push the battery box into the cabinet one by one along the card slot, and fix the battery pack
with M6×12 screws.
Picture 3-8assemble the battery box
3.3.2 Hybrid inverter Installation Guide
This Hybrid inverter is designed for outdoor use (IP65), Please make sure the installation site
meets below conditions:
◼
Not in direct sunlight.
◼
Not in areas where highly flammable materials are stored.
◼
Not in potential explosive areas.
◼
Not in the cool air directly.
◼
Not near the television Antenna or antenna cable.
◼
Not higher than altitude of about 2000 meters above sea level.
◼
Not in environment of precipitation or humidity (>95%).
Please AVOID direct sunlight, rain exposure, snow laying up during installation and operation.
Before connecting all wires, please take off the metal cover by removing screws as shown below:
Positive and negative terminal
