LPT-3000 Remote User
’
s Guide
10
LP Technologies Tech Support
E-mail
, or Call
316-831-9696 Ext 0
Power Consumption
Less than 80W
[Table 2-2] Requirements for AC Power
3. Fuse Check
A spare fuse should be included with the LPT 3000R. The holder is located in the upper part of the
power switch on the back of the device. The spare is contained behind the fuse currently in use. If
there is no longer a spare fuse in this location, a replacement should be acquired that matches the
following properties. (250 VAC, 3.15 A type T 5 × 20 mm).
4. Power Cable
In accordance with International Safety Standards, the LPT 3000R’s power cable uses 3 lines
including ”Ground”. When connected to a power outlet, the cable grounds the cabinet of the unit.
5.
Environmental Conditions
The LPT-3000R Spectrum Analyzer will operate normally between the temperatures of 0
℃
and
40
℃
. However, for best performance, it is important to avoid exposing the unit to conditions
To reduce the risk of fire, please use only the recommended fuses. Using a fuse with a different
power rating may cause serious damage to the spectrum analyzer.
WARNING!
Please use a grounded power cable with three lines, or connect the spectrum
analyzer to a protective “Ground” line. Operating the unit without following these
requirements may put you at risk of an electric shock. It is also important to check
the source voltage, because if it exceeds the recommended value, the spectrum
analyzer may be permanently damaged or catch fire.
WARNING!