Lowrance M68C IceMachine, Инструкция по установке и эксплуатации

Страница: 111 / 176

103
Navigate a trail menu sequence: Fig. 1, My Trails command. Fig. 2,
Trails Menu. Fig. 3, Edit Trail Menu. Fig. 4, Edit Route Menu with
Navigate Route command highlighted for Trail 1. A trail is always con-
verted to a "route" when you navigate the trail.
On the Map Page, the trail you are navigating is represented by a
flashing magenta line (if the visible trail option is on). The course you
are following (the trail converted to a route) is represented by a red
line. The Navigation Page and the Position Page will also show the
course in the same way. The bearing arrow on the compass rose points
to the next waypoint on the trail.
As you travel, the arrival alarm will go off when you near a trail way-
point, and the bearing arrow on the compass rose will swing around
and point to the next trail waypoint. Press
EXIT
to clear the alarm.
Figure 3. Figure 4.
Figure 1.
Figure 2.