Lowrance HDS Live, Руководство оператора

Страница: 84 / 198

Recording DownScan data
DownScan data can be recorded by selecting the correct file format
in the record dialog. Refer to
"Start recording sonar data"
on page 67.
Setting up the DownScan image
Use the DownScan menu to set up the image. When the cursor is
active, some options in the menu are replaced with cursor mode
features. Select the clear cursor menu option to return to the
normal menu.
Source
Ú
Note:
Available only if multiple sources with the same
capability are available.
Used to specify the source for the image in the active panel.
You can display different sources simultaneously, using a multi-
panel page configuration. Menu options for each panel are
independent.
Ú
Note:
Using transducers at the same frequency can cause
interference.
For source setup information, refer to the HDS Live Installation
Manual.
Range
The range setting determines the water depth that is visible on the
image.
Preset range levels
Select a preset range level manually from the menu.
Auto range
In auto range, the system automatically displays the whole range
from the water surface to the bottom.
Auto is the preferred setting for fish finding.
Select the range option and then the auto option in the menu.
84
DownScan | HDS Live Operator Manual