Lowrance HDS Live, Руководство оператора

Страница: 61 / 198

E
Bearing line with allowed off course limit
When travelling on a route the bearing line shows the
intended course from one waypoint towards the next.
When navigating towards a waypoint (cursor position, MOB,
or an entered latitude and longitude position), the bearing
line shows the intended course from the point at which
navigation was started towards the waypoint.
F
Vessel symbol
Indicates distance and bearing relative to the intended
course. If the XTE (Cross Track Error) exceeds the defined XTE
limit, this is indicated with a red arrow including the
distance from the track line.
Refer to
"XTE limit"
on page 63
.
Navigate to cursor position
You can start navigating to a cursor position on any chart, radar, or
sonar panel.
Position the cursor at the selected destination on the panel, and
then select the go to cursor menu option.
Ú
Note:
The go to cursor menu option is not available if you are
already navigating.
Navigate a route
You can start navigating a route from the chart panel, steer panel, or
from the Route dialog.
When route navigation is started, the menu expands and shows
options for canceling the navigation, for skipping a waypoint, and
for restarting the route from current vessel position.
Starting a route from the chart panel
Activate a route on the panel, and then select the route navigation
option from the menu.
You can select a routepoint to start navigating from a selected
position.
Navigating | HDS Live Operator Manual
61