Lowrance Active Imaging 3-IN-1, Руководство по установке

Страница: 7 / 24

E
Do not mount the transducer under the hull or so
that it hangs down under the hull. The transducer
is better protected when mounted above the
bottom of the hull. There is less chance of
damage from obstructions in the water, or when
trailering and launching the boat.
Transducer mounting options
Transom mount
(Transom bracket)
Refer to
"Transom
mount"
on page 10
• Keeps transducer in the water when the
boat is on plane, allowing you to track
bottom at high speeds
• Transducer angle can be adjusted so it is
parallel with the water
• Transducer more likely to collide with
obstructions in the water and adds drag
to the boat
Step mount
(Transom bracket)
Refer to
"Step mount
using the transom bracket"
on page 12.
• Transducer is not in the water when boat
is on plane; protects transducer and
prevents drag from transducer
• Transducer angle can be adjusted so it is
parallel with the water
• Sonar does not track bottom when
transducer comes out of the water
"Jackplate mount using the
transom bracket"
on
page 15
• Transducer is not in the water when boat
is on plane; protects transducer and
prevents drag from transducer
• Transducer angle can be adjusted so it is
parallel with the water
• Allows you to mount transducer without
drilling holes in your boat
• Sonar does not track bottom when
transducer comes out of the water
Installation | Active Imaging transducers Installation Manual
7