Lowrance Active Imaging 3-IN-1, Руководство по установке

Страница: 6 / 24

Installation
Mounting options
The transducer can be mounted on the transom, jackplate, or step.
Use the following table to determine which mounting option is
best suited to your boat/installation preferences.
Ú
Note:
When installing, keep the transducer on the protective
foam nest where the transducer is placed from factory.
Ú
Note:
Before drilling any holes, ensure that holes are drilled in a
safe position. Ensure you do not drill into tanks, reservoirs,
hoses, or cables, etc. and that the holes will not weaken the
structure in any way.
Ú
Note:
When mounting the transducer, make sure there is
nothing around the mounting location that could interfere with
its sonar beams.
Ú
Note:
If mounting where the transducer comes out of the
water, for example when the boat is on plane, the sonar will not
work while the transducer is out of the water.
A
B
C
D
E
X
A
Jackplate mount (Transom bracket)
B
Direct Step mount (Flush bracket)
Requires separately sold Skimmer Flush mount kit
(part no. 000-12602-001)
C
Step mount (Transom bracket)
D
Transom mount (Transom bracket)
3
6
Installation | Active Imaging transducers Installation
Manual