©2021 Lowell Manufacturing Co. UPS9A Series (X-Rev 8/13/20)
Pg. 22
•
04: ECO enable/disable
Interface
Setting
Parameter 2:
Enable or disable ECO function. You may choose
the following two options:
ENA:
ECO mode enable
DIS:
ECO mode disable (Default)
•
05: ECO voltage range setting
Interface
Setting
Parameter 2:
Set the acceptable high voltage point and low
voltage point for ECO mode by pressing Down key or Up key.
HLS:
High loss voltage in ECO mode in parameter 2.
For UPS9A models, the setting range in parameter 3 is from
+3V to +12V of the nominal voltage. (Default: +6V)
LLS:
Low loss voltage in ECO mode in parameter 2.
For UPS9A models, the setting voltage in parameter 3 is from
-3V to -12V of the nominal voltage. (Default: -6V)
•
06: Bypass enable/disable when UPS is off
Interface
Setting
Parameter 2:
Enable or disable Bypass function. You may choose
the following two options:
ENA:
Bypass enable
DIS:
Bypass disable (Default)
