©2021 Lowell Manufacturing Co. UPS9A Series (X-Rev 8/13/20)
Pg. 16
one side of plastic shells as below chart.
below chart. Then, battery kit is assembled well.
4-battery kit
Step 1: Remove adhesive tapes.
Step 2: Connect all battery terminals by following
below chart.
Step 3: Put assembled battery packs on
Step 4: Cover the other side of plastic shell as
one side of plastic shells.
below chart. Then, battery kit is assembled well.
6-battery kit
Step 1: Remove adhesive tapes.
Step 2: Connect all battery terminals by following below
chart.
Tapes
Tapes
Tapes
Tapes
