EN
10
•
Ensure that the press connectors on
the front are properly closed. If the
press connectors are not attached or
closed properly, hazardous situations
may arise.
PLEASE NOTE
9.
Close the loop connectors with the
⓬
caps.
Figure 10 - Attaching the rods.
10.
Open the caps on the top of the two
adapters
❽
. The rods can be inserted
here.
Figure 11 - Attaching press connectors front side.
Figure 13 - Attaching the loop to the loop connectors.
Figure 8 - Closing loop connectors.
WARNING
•
If you do not use the rain cover, it is
important to close the openings on the
adapters. This ensures that children's
fingers cannot become trapped.
Figure 9 - Opening caps for adapters.
Figure 12 - Correct position press connectors.
11.
Slide the
❸
angled rods into the
❽
adapters until they cannot move any
further.
12.
Take the fabric with rods and attach
the rod assembly to the
❸
angled rods
in the Lovens Explorer.
13.
Attach the press connectors on the
front of the bike to the fixing points in
the fabric.
14.
Attach the loop at the rear to the loop
connector to close the rain cover.
15.
The Velcro strip may also be attached
around the frame at the side of the
bike.
