EN
9
Figure 3 - Placing rod assembly in rain cover.
4.
Place the rod assemblies in the
opening provided for this purpose in
the fabric, with
the short, hollow rod
first.
5.
Attach the two adapters
❽
to the bike.
Use the M4x20 bolt
❻
and M4 washer
⓮
on the underside and the M6x20 bolt
8.
Turn the
screw with loop connectors
into the rear of the Lovens Explorer.
7.
Insert the
countersunk screw
❿
into
the loop connector
⓫
.
❼
and M6 washer
⓭
on the side.
6.
Screw the press connectors
❾
into the
front of the Lovens Explorer. Fix these
in place using a 9 mm open-ended
wrench.
Short hollow rod
Long straight rod
Figure 2 - Placing connecting rod in rain cover.
Figure 5 - Attaching the screw with press connector.
Figure 6 - Placing flathead screw in loop connector.
Figure 4 - Attaching the adapters to the frame.
Figure 7 - Attaching the screw with loop connector.
