I580
GB
I
07
19
31100419
7
G
B
Command via RS485 serial communication from DCRG8F controller
Induttori raccomandati
Recommended inductors
Moduli a tiristori DCTL
Tyristor module DCTL
Command with dry contact
REQUIREMENTS
– The DCRG8F controller must be equipped with the optional RS485 communication module code EXP1012
– Each DCTL thyristor module must be equipped with the optional RS485 communication card code EXC1042.
– With this configuration is possible to monitor from the display of DCRG8F controller the status and the measures of each DCTL thyristor module.
– For information about the programming refer to the technical manual of DCRG8F (instruction I564), downloadable from the website www.LovatoElectric.com.
– Note. The EXP1012 mounted on DCRG8F controller is dedicated for the command of DCTL thyristor modules. If necessary to connect the DCRG8F controller to a supervision system (e.g. a PC) is necessary to
add another communication expansion module, at choice between the codes compatible with DCRG8F (in the wiring diagram above is shown as example another RS485 module EXP1012).
